Symantec 4400 Series, Руководство по установке

Страница: 27 / 100

23 Appliance setup and initial system configuration
Using the network setup worksheet
Using the network setup worksheet
During the Clientless VPN Gateway appliance setup process, you enter network
address information. Once you enter that information, the appliance’s LCD
screen displays one password that you need to initiate remote management.
This password is used for the administrator password. Use the worksheet to
make note of this information.
Make a copy of this form and store the completed form in a secure location. This
form serves as a permanent record for each Clientless VPN Gateway appliance
installed at your site.
Network setup worksheet
User input during initial setup
To configure an interface for appliance management, you need the following:
Interface IP address _____________________________________
Netmask ________________________________________________
Default Gateway _________________________________________
Symantec Clientless VPN Gateway appliance output during
initial setup
Record the Administrator password from the LCD display:
Administrator password
1
__________________________________
1
The password is output during the hardware setup process. This password is also used as the adminis-
tration password. You can change this password independently from the SGMI or the Command-
line interface. This password is used to unlock the front panel controls.