Sylvac D 100S, Инструкция по эксплуатации

Страница: 62 / 76

62
1.12 TECHNICAL SPECIFICATIONS
Enclosure : in terblend plastic ( = ASA + polycarbonate ) :
resistant to alcohol, glycols, most oils and greases, diluted acids
and water.
Non-resistant to aromatic hydrocarbons, esters, ketones, concentrated
Mineral acids, ammonia gas and its dilutions.
Front panel : Polyester.
Rear panel : Aluminium varnish.
Keyboard : Flat with metal dome tactile response.
Dimensions : Width 227 mm, depth 132 mm height 77 mm without (87mm
with stand).
The stand is adjustable : vertical or inclined at 13°
A complementary base (supplied with the unit) allows an inclination of 35°.
Degree of IP protection : IP40 (according to IEC 529).
Weight of unit : 1.3 kg (2.9 lb).
Accuracy of measurement for D100S + interchangebility of probes and unit guaranteed as follows :
probes :
Probe type D100S error Probe error
Mean error
P2 1.5 µm 0.8 µm 1.0 µm
P5 1.0 µm 1.5 µm 1.8 µm
P10 1.2 µm 1.0 µm 1.6 µm
P25 1.5 µm 1.2 µm 1.9 µm
P50 3 µm 2.5 µm 3.9 µm
Repeatability (+/- 2s) : P2 : 0.3 µm
P5 : 0.3 µm
P10 : 0.2 µm
P25 : 0.2 µm
P50 : 0.4 µm
Operating temperature : Between +5° and +40 °C
Storage temperature : Between -20° and +45 °C
Measuring frequency : Probe in Probe out
P2 :
between 170 and 205 measurements per sec.
P5 : between 170 and 205 measurements per sec.
P10 : between 170 and 205 measurements per sec.
P25/P50 :
between 130 and 205 measurements per sec.
The value measured is filtered digitally for the display, according to the resolution :
0.0001 mm or 0.00001 in : approx. 3 readouts per sec.
(=3 analog outputs per sec.)
0.001 mm or 0.0001 in : approx. 5 readouts per sec.
0.01 mm or 0.001 in : approx.12 readouts per sec.
0.1 mm or 0.01 in : approx.15 readouts per sec.
in min/max mode : no filtering, 60 readouts per sec.
for 0.1, 0.01 et 0.001 mm
Display: LCD , STN type (Super Twisted Nematics ), graphics 128 x 64dots.
Viewing area 66 x 33 mm. CCFL. back-lighting.