manualshive.com logo in svg

Sylvac D 100S, Инструкция по эксплуатации

Поделиться
Скачать
Sylvac D 100S Скачать руководство пользователя страница 41

41

c/ Printing of statistical values with tolerances active (printing therefore of 2

nd

 statistical and histogram) and with

complete header. After printing, the unit ask if you wish to print stored values, as in the examples below. If the stored
values are printed, the unit will then request whether they should be kept (

Æ

 press 

Enter

) or if they should be

erased from memory of the channel in operation (—> press 

Clear

) :

SYLVAC SA

   Piece ident.  :  COUVERCLE
   Drawing nbr.  :  PM230.010.412
   Work station :  L 201

   Date :  12/11/1998                                           Time :  14:41

CHANNEL     1

       N       30               Xmax       8.361        Xmin     8.338            R    0.023         Xbar    8.352

Sigma         0.0063            s        0.0064       -3 S     8.333       +3 S    8.371

   - NG         1              + NG        0              %Def     3.333

      Cp         0.7933      Cpk         0.6433        Cm     0.7800      Cmk    0.6325

                                                                                                                                    0  + NG

               ULT   ---------------------------------------------------------------------------------------------------------------------     8.3700

                                                                                                                                    0

                                                                                                                       8.3640

 

                                                      ###########################################    7

                                                                                                                       8.3580

                            ########################################################    9

                                                                                                                       8.3520

                           ########################################################     9

                                                                                                                       8.3460

                                                                                         #########################     4

               LLT   ----------------------------------------------------------------------------------------------------------------------    8.3400

                                                                                                                                  *******    1   - NG

   1             8.342                       2    8.342                   3    8.350                     4    8.359          5    8.359
   6             8.358                       7    8.342                   8    8.344                     9    8.354        10    8.348
  11            8.356                     12    8.360                 13    8.360                   14    8.357        15    8.353
  16            8.351                     17    8.348                 18    8.350                   19    8.353        20    8.349
  21            8.349                     22    8.349                 23    8.350                   24    8.354        25    8.353
  26            8.338                     27    8.361                 28    8.361                   29    8.361        30    8.354

Содержание D 100S













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды