= The AUX output is enabled/disabled with the door opener button.
The switching time of the AUX output can be programmed from 001 to 999 seconds
(see section 8. q). When the switching time is set to “000”, the AUX output operates in
toggle mode. Each press of the door opener button permanently activates or deacti-
vates the AUX output. When the AUX output is activated, the LED lights up red.
= The AUX output is enabled/disabled by entering the AUX code or using a dedicated
paired AUX transponder.
The switching time of the AUX output can be programmed from 001 to 999 seconds
(see section 8. q).
When the switching time is set to “000”, the AUX output operates in toggle mode. Each
entry of the AUX code or each use of the AUX transponder permanently activates or
deactivates the AUX output.
When the AUX output is activated, the LED lights up red.
The AUX code and, if necessary, an AUX transponder must also be programmed, as
described in section 8. r).
•
The code lock will emit a long beep.
•
Other settings can now be made, if desired. Press the button to exit the programming
mode.
Example 1: The AUX output is assigned a doorbell function (it is activated for a preset time by
pressing the button); for example, the switching time can be programmed to 8 seconds ac-
cording to section 8. q):
Example 2: The AUX output is assigned a tamper protection function (it is activated for a preset
time when the code lock is detached from the wall or the light sensor on the back is exposed to
light beams); the switching time can be programmed according to section 8. q):
67
