The wireless socket remains in programming mode for
about 15 seconds. If you do not complete programming
of the wireless socket within this time period, program-
ming mode is automatically cancelled. The LED stops
flashing after 15 seconds. You can put the wireless
socket back into programming mode and attempt to
pair it again. To do this, press and hold a button on the
ON
side of the remote control (left) for 5 seconds until
the power LED (6) starts to flash.
4.
Once you have successfully programmed the first wireless
socket, you can use the corresponding
ON/OFF
channel but-
ton combination to set other wireless sockets to programming
mode using the remote control. Press and hold the two pro-
grammed channel buttons
ON
and
OFF
until the power LED
(6) of a wireless socket starts to flash.
5.
If the first three channel button pairs are occupied, you can
program additional wireless sockets on the other channels.
To do this, set the switch group selector switch (4) to one of
the other switch group symbols (II, III or IV) and program the
channel buttons for the next, and if necessary, other switch
groups. Three wireless sockets are included with this product.
Additional wireless socket sets can be ordered separately.
6. Repeat the programming procedure for the remaining wire-
less sockets until all channels are occupied. You can program
up to 12 channels (wireless sockets) with the remote control.
However, if you program more wireless sockets than
this number, the programmed channels/wireless sock-
ets will be deleted at random and re-assigned.
43
