8. Operation
a) Inserting/replacing batteries (remote
control)
1.
When using for the first time, open the battery compartment
cover (5) on the back of the remote control and pull out the
plastic separating strip from between the battery and the con-
nection contact.
2. To change the battery, remove the battery compartment cov-
er (5) from the back of the remote control.
3. Remove the used button cell battery.
4. Insert a new button cell of type CR2032 into the battery hold-
er. The positive terminal should point upwards (see ‘+’ symbol
on the battery). Slide the button cell into the battery holder
until it reaches the end.
5. Close the battery compartment again.
The battery needs to be replaced if the range of the
remote control is significantly reduced or if the LED in
-
dicator light (1) no longer lights up when the buttons are
used.
b) Connecting the wireless socket
1. Plug the wireless sockets 1 to 3 into a standard household
mains socket.
2.
The power LED (6) starts to flash when the product is sup
-
plied with power.
40
