3. Repeat this procedure for all 12 channels. Set the desired
switch group (I, II, III or IV) on the remote control using the
switch group selector switch (4).
f) Function test
1. Set the desired switch group (I, II, III or IV) on the remote
control using the switch group selector switch (4).
2. Plug the wireless socket into a standard household mains
socket.
3. Press the corresponding control button on the left side of the
remote control, the
ON
channel button (2).
4. The power LED (6) on the wireless socket lights up, which
means that the wireless socket has been activated.
5. To deactivate the wireless socket, press the respective oper-
ating button on the right side of the remote control, the
OFF
channel button (2). The power LED (6) goes out.
The power consumption of the connected electrical
consumer must not exceed 1000 W. In the event of
an overload, the internal thermal fuse in the wireless
socket will trip.
The thermal fuse is not self-resetting. Should this hap-
pen, the wireless socket can no longer be put into oper-
ation.
46
