SYCLOPE electronic TERE'O Touch XL Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 55

SYCLOPE electronic TERE'O Touch XL Скачать руководство пользователя страница 4

Generality

Page 4/55

SYCLOPE TERE’O Touch XL

®

Installation, starting, and programming instructions

I.

Generality

1)

Scope

SYCLOPE TERE’O Touch

®

analyser/controller you have purchased is a high-tech electronic device. It

was designed and created carefully for your enjoyment and your peace of action.

Its remarkable faculty to adapt to different swimming pool structures allows it to settle in all difficult

environments where mastery of water treatment is most decisive.

With 1 Temperature, 1 pH and 1 chlorine or bromine inputs, 1 circulation control input and 2 tank level

inputs,

SYCLOPE TERE’O Touch

®

is equipped with cyclically controlled proportional control functions

transmitted through 2 dosing pumps for the control of pH minus or pH plus, chlorine or bromine.

Thanks to HYDRO TOUCH ease of use, their user-friendliness and their remarkable technicality, you will
fully enjoy its many possibilities and will be assured of a perfect control and perfect monitoring of your

pool water quality.

You will find in the instructions that follow, all the information needed for the installation, use and
maintenance of your new equipment.



Packaging



Installation



Basic equipment



Specifications



Commissioning instructions



Safety instructions

If you need more information or if you encounter problems that not have been specified in this guide,

please quickly contact your retailer or SYCLOPE Electronique S.A. sales department, either at the agency
or office in your area, or at technical/quality service at our head office. We will do our best to help you

and make you enjoy our advice and our knowledge in the field of measurement and treatment of pools
water.

Contact:

[email protected]

«
...
2
3
4
5
6
...
»

Содержание TERE'O Touch XL
























































Отзывы:

Нет отзывов