Swissvoice Avena 135, Руководство пользователя, Страница: 87 / 100

85
20401541en_ba_a0
Multiple handsets
Log on the handset
With the Avena 135 /135 Duo you can operate up to 5 handsets on the same base
station . This allows you to make internal calls between handsets free of charge.
For each handset a procedure must be followed which sets up a radio connection
between the base station and the respective handset. This procedure is called “Log on”
and is described hereafter:
Press the paging key on the base station for approx. 10 seconds until you hear
a confirmation tone. The base station is now ready to accept a new handset.
Open the menu by pressing the “Menu” softkey.
Select the menu entry and press the “OK” softkey.
Select the menu entry and press the “OK” softkey.
Select to log the handset on to your base station.
If you are using more than one base station, you may select another base
station e.g. B, C or D.
Press the “OK” softkey. The display reads .
If the base station was found, then you are requested to enter the system PIN
code of that base station.
Confirm with the “OK” softkey. The handset is now logged on to this base
station. The display will reflect this by showing both the
∏
and
A
symbols.
Note • If the log-on procedure was successful, the display will show the name as
well as the internal number of the handset e. g. .
The internal number of the handset is automatically assigned by the
base station and cannot be changed.
• To make it easier to identify the handset, you may change the name of the
handset e.g. to “PETER” or “MARY”.
Intern 2
Searching BS !
Base station A
Log-on HS
Settings
OK
OK
Menu
OK
OK
Z