Swissvoice Avena 135, Руководство пользователя, Страница: 77 / 100

75
20401541en_ba_a0
Base Station settings
Changing PIN code
The PIN code is a 4-digit secret number to protect your telephone from unauthorised use.
At the factory, the PIN code is initially set to “0000”. It is highly recommended to change
this PIN code as soon as possible to your own personal code!
Open the menu by pressing the “Menu” softkey.
Select the menu entry and press the “OK” softkey.
Select the menu entry and press the “OK” softkey.
Select the menu entry and press the “OK” softkey.
Open the menu by pressing the “Menu” softkey.
The display shows . Enter the current PIN code
(factory setting “0000”) and press the “OK” softkey.
The display shows requesting you to enter a new
4-digit PIN code. Finish by pressing the “OK” softkey.
The display shows requesting you to enter the
new PIN code again. Finish by pressing the “OK” softkey. The display briefly
shows
. The new PIN code is now stored.
Press the cancel key for approx. 2 seconds to return to the standby mode.
Note • Only authorised service staff can reset the PIN code! Thus make sure that
you do not forget your PIN code!
• If you enter a wrong PIN code, the display shows .
Press the cancel key (or wait a few seconds) after which you are requested
to re-enter the correct code.
Wrong PIN code :
Stored !
Repeat PIN code:
New PIN code :
Old PIN code :
Edit PIN code
BS settings
Settings
OK
OK
OK
Menu
Menu
OK
Z
OK
Z
OK
Z
…