Swissvoice Avena 135, Руководство пользователя, Страница: 49 / 100

47
20401541en_ba_a0
Multiple conversations
Making an external inquiry call
An external inquiry call is performed in the telephone network (supplementary network
service). This means that you will have to verify that this service is available from your ser-
vice provider and that this service is activated with a flash signal. Make sure that the cor-
rect flash signal period is programmed in your Avena 135 /135 Duo.
You are conducting an external call and you want to call another external
party without ending the first conversation.
Start the external inquiry call by pressing the R-key (flash key).
If this service is supported by your service provider you will hear the dial tone.
Now, enter the external telephone number for your inquiry (or select a num-
ber e.g. from the phonebook).
You now have two (external) calls at the same time, one of which is on hold.
You can switch between both parties by pressing the “Brokering” softkey.
You can also enter into a 3-party conference call by pressing the “Conference”
softkey.
Note • If you end this inquiry by pressing the talk key , the current conversa-
tion is ended and your handset starts ringing indicating that you still have
another call holding. Press again the talk key to switch back to this conver-
sation.
• It is not possible to make an external inquiry if you already are in an internal
conversation.
H
Brok
Conf
Z