swepac F 82B, Руководство пользователя

Страница: 19 / 28

Doc:
101547
-GB-2140
19
Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com
F82B
F92B
Transport locking for machine
B00033
During transportation: Secure the machine with straps
according to the illustration above.
NOTICE. Secure the machine by the base plate and not the
rubber-cushioned upper part.
Handling the battery pack
Note the following precautions when carrying the battery
pack.
• To carry the battery pack, remove it from the specified
device or battery charger.
• Hold the grip of the battery pack and grasp it firmly so
your fingers do not slip from the grip.
• Do not swing the battery pack around or throw it.
When loading the battery pack in a vehicle, place it in a
level location inside the vehicle or load bed, and secure it
so it does not move. If there are regulations that stipulate
transportation methods, such as requirements for storage
in a specified storage case, then follow those regulations.
Also, note the following precautions when loading the
battery pack into a vehicle.
• Remove the battery pack from the specified device or
battery charger and protect it with cushioning material.
• Face the intake/exhaust port downward when loading
and securing the battery pack, so rainwater does not get
inside.
• Do not throw the battery pack into or out of the load bed
of a vehicle.
• Avoid direct sunlight, and do not load or secure the
battery pack in a location that can become very hot, such
as in an enclosed vehicle.
• Do not stack battery packs when loading them.
• Do not place baggage on top of the battery pack and be
careful that other baggage does not slide and collide with
the battery pack.
When shipping by third parties (e.g.: by air transport or
forwarding agency), special requirements on packaging
and labelling must be observed. For preparation of the
item being shipped, consulting an expert for hazardous
material is required.
• Ship battery packs only when undamaged.
• Observe the possibility of more detailed national
regulations.
Handling the battery charger
Remove any battery before transporting the battery
charger.
CLEANING
Machine
• Remove the battery pack before using a hose or
pressure washer for cleaning the machine.
• Do not spray water on the battery pack while cleaning
the machine. Water entering the components may cause a
malfunction.
• After cleaning wipe off the DC power unit with a clean
dry cloth.
Battery
• Before cleaning the battery pack, remove it from the
machine or the battery charger.
• If the battery pack and connector are dirty, wipe them
off with a clean dry cloth.
Battery charger
• Before cleaning, always unplug the AC plug from the
electric outlet.
• If the battery charger is dirty, wipe it off with a soft dry
cloth.
STORAGE
Machine
• Before storing, remove the battery pack to prevent
unintended operation.
• Store the machine on a level surface.
• Avoid storage areas with high temperature and high
humidity, or environments with severe temperature
changes. Keep away from direct sunlight and rain.
Battery pack
Inappropriate long-term storage can cause the battery
pack to deteriorate quickly and it may become unusable.
• Before storing the battery pack, remove it from the
machine or the battery charger, to prevent unintended
operation.
• Storing the battery pack in a very warm location can
cause the battery pack to deteriorate quickly. – Optimal
storage at room temperature. See ”TECHNICAL DATA” on
page 24 for the storage temperature range.
• Before putting the battery in long-term storage, refer to
the following table to confirm whether the charge level of
the battery pack is suitable for long-term storage.
• Also check the charge level of the battery pack once a
year while it is in storage.