swepac F 82B, Руководство пользователя

Страница: 17 / 28

Doc:
101547
-GB-2140
17
Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com
F82B
F92B
OPTIONS
Water tank
B00027
1
2
3
4
The water tank for this machine is removable. To mount
the water tank do as follow:
• Push the water tank (1) down with the locking bolt (2)
open. The rear part of the water tank shall be placed in
the holder on the bracket.
• Make sure that the water tank hangs firmly in the holder.
Release the locking bolt and check that the pin fits in the
hole on the bracket.
• Insert the two screws (3) to attach the sprinkler plate to
the base plate.
Open the water tap (4) by turning it counterclockwise to
start the water supply when working on asphalt.
Stop the water supply by turning the water tap clockwise.
B00044
2
6
5
1
3
4
Disassemble the water tank doing as follow:
• Push the locking ring on the coupling (1) towards the
water tank (2) and hold it in this position while pulling the
hose (3) out of the water tank.
• Pull the locking bolt (4) outwards and release the water
tank from the bracket.
• Unscrew the two screws (5) and remove the sprinkler
plate (6).
Transport wheels
B00029
1
2
The transport wheel kit for this machine is possible
to mount afterwards. The transport wheels in the
picture are in transport position.
To mount the transport wheel kit do as follow:
• Loosen the two screws which hold the rear part of
the protection frame (1).
• Place the transport wheels (2) with the screw holes
fitting against the holes in the protection frame and
the engine plate. Tighten the screws.