Programming
0705
TTPM3 Printer/Encoder–Technical Manual
45
~
Encodes the ticket, performs read-after-write, and cuts the ticket. The ticket
stops after the cutter (where the after cutter sensor still can see the ticket). Here
it waits for print data and !P command before proceeding to be printed and
ejected to the customer
Apart from print data and !P, only the following commands are allowed. !L3, !L4,
and !L5.
!L5 "Eject document into waste bin" will throw away the ticket from the waiting
position into the waste bin without erasing the data to avoid that the ticket
material in the upper track is being pushed out.
—
(minus sign) Disables encoding on magnetic retries. If magnetic retries occur it
is almost certain that it is the read-after-write fails due to interference. If
encoding is disabled on the retry, the interference level is drastically reduced
and the possibility of a successful reading increases. This is especially useful
for HiCo tickets.
MAGNETIC ENCODING RETRIES
See ”Canceling a ticket” on page 40.
ENCODING TWO TRACKS ON A HICO TICKET:
!C
↵
!M 1234567890123456789012345678901234567 |
↵
!P
↵
!C
↵
!J ON TRACK 1 YOU CAN ENCODE UP TO 79 ASCII ALPHANUMERICAL
CHARACTERS AND DIGITS
↵
F T N 50 140 1 1 1 3 "HiCo Test"
↵
!P
↵
The
|
character in the
string makes the ticket
return to active position
after encoding this track
