Programming
0705
TTPM3 Printer/Encoder–Technical Manual
23
4.3.8 Additional
commands
In addition to the command that specifies the print, there are a number of other
commands used for functions such as:
•
Clearing of the TTPM3 buffer
•
Selection of document entry
•
Decoding of documents
•
Generation of status requests
All applicable commands are listed in the following pages. Detailed descriptions of the
software commands are given with syntax explanations as well as commented examples.
4.3.9 Ticket
memory
The TTPM3 printer has 128k of RAM. This memory is used as input buffer and storage
for the ticket image before being printed out. The memory is cleared at power off.
In normal resolution mode, the ticket image is 384x512 pixels for an 86 mm ticket, and
384x656 pixels for a 110mm ticket.
In high resolution mode, the ticket image is 384x727 pixels for an 86 mm ticket, and
384x935 pixels for a 110mm ticket.
NOTE! –
Make sure not to print data outside this area when you use the !F command.
If you do, you write in parts of the memory that are used for other functions in
the printer, and the result is totally unpredictable.
