21
sWaP Signature
&
Active
user guide
www.s-w-a-p.co.uk
Contents
User Profiles
These allow you to change the whole nature of your
call-, key-, message- and alarm- alerts in one easy
action.
Note:
Flight Mode
switches off all communication
aspects of your sWaP watch to let you use other
features without infringing ‘no mobile’ rules in certain
areas. You can also choose whether to see a Flight
Mode option whenever you first switch on.
1 From the clock face, tap
Menu
or press the lower
button.
2 Tap (twice, if necessary).
3 Tap
User Profiles
.
A list of all profiles will be shown:
General
Headset
Meeting
Bluetooth
Outdoor
Flight Mode
Indoor
To use a profile
• Tap a profile and then tap
Activate
or
Ok
. Your choice
will be confirmed.
To adjust a profile
1 Tap a profile name and then tap
Customize
. You can
now adjust the following:
•
Tone Setup
for all instances:
Incoming calls, alarms, power on and off, incoming
messages and keypad tones.
•
Volume
for ring tones and key tones.
•
Alert Type
for mixes of alert tone and/or vibration
alerts.
•
Ring type
to choose Single, Repeat or Ascending
alerts.
•
Extra Tone
to allow extra tones for warnings, errors,
etc.
•
Answer Mode
allows you to enable or disable any
key answering of incoming calls and also choose Auto
answering of incoming calls.
Phone Setup
Contains many configuration options to customise the
operation of your sWaP watch.
1 From the clock face, tap
Menu
or press the lower
button.
2 Tap (twice, if necessary).
3 Tap
Phone Setup
.
The menu options will be shown:
•
Swipe Function
allows you to link any of seven sWaP
watch functions to a handwriting gesture on the
clock face. Thus, you could make an upward stroke
of the stylus on the clock face to immediately cause
your Phone Book to be shown. There are four swipe
gestures that can be defined.
•
Time and Date
allows you to set the current time
and date. You can also determine the time and date
formats and define your nearest major city within your
timezone.
•
Schedule Power On/Off
allows you to maximise your
power efficiency while you’re asleep by choosing times
to automatically switch your sWaP watch off and on.
•
Language
lets you choose the appropriate language
for all menus and messages within your sWaP watch.
•
Preferred Input Method
determines which on screen
keypad is displayed first when you need to enter
details.
•
Display Characteristics
contains numerous settings
related to the visual aspects of operation:
Wallpaper
allows you to choose the image that is
displayed behind all menus. You can choose a standard
image from the
System
option or choose one of your
own that is stored within memory using the
User
Define
option.
Screen Saver
allows you to choose an image that
will be displayed during periods of inactivity. You can
choose a standard image from the
System
option or
choose one of your own that is stored within memory
using the
User Define
option. You can also disable the
screen saver mode.
Power On Display
and
Power Off Display
allow you
to choose a picture or animation to be shown when
your sWaP watch is powered on and off. You can
choose a standard image from the
System
option or
choose one of your own that is stored within memory
using the
User Define
option.
Show Date and Time
determines whether the current
data and time are shown on the clock face page.
Show Operator Name
determines whether the
current network name is shown on the clock face page.
Clock Type
allows you to choose the clock face design
for the standby screen.
•
Speed Dial
allows you to define up to eight of your
most regularly used phone numbers and associate them
with dial numbers 2 to 9. Once enabled, when you are
viewing the clock face, tap twice as you normally would
to dial a number, but then tap and hold a number
between 2 and 9 to call the associated phone number.
•
Auto Update of Date and Time
determines whether
the network date and time signal should be used to
update your sWaP watch settings.
•
Handwriting
allows you to choose a Pen Speed
and Pen Color for use in handwriting recognition
applications.
•
Misc Setting
>
LCD Backlight
allows you to adjust the
brightness of the touch screen backlight.
