8
Swan Helpline Number: 0345 610 4118
water tightness. For the safety of your machine, make sure to always turn off
the water inlet tap after each wash programme is finished.
Water outlet hose
The water drain hose can be connected either directly
to the water drain hole or to the sink outlet spigot. Using
a special bent pipe (if available), the water can be
drained directly into the sink via hooking the bent pipe
over the edge of the sink. The top of the outlet tube
should be at a minimum of 50cm high and no higher
than 110cm.
For further Installation advice please see separate Assembly Instructions
sheet.
DO NOT PUSH THE APPLIANCE INTO PLACE WHILST IT IS PLUGGED
IN. THIS APPLIANCE MUST BE PLUGGED IN TO AN EARTHED SOCKET.
