16
Swan Helpline Number: 0345 610 4118
Changing the program during use
1. Open the door (slightly at first to avoid water spillage).
2. Keep the program selection button pressed for 3 seconds and the end
of program indicator will flash.
3. Close the door and the machine will drain in about 30 seconds. Once
the appliance beeps 5 times, it is ready to be reprogrammed.
Program Table
Wash
Program
Max. Water
Temp.
Drying
Cycle
Duration
(Mins)
Electricity
Consumption
(KW/h per
cycle)
Water
Consumption
(l/cycle)
P1. Intensive
70°C
Yes
110
1.55
16.5
P2.
Super 50’
Wash
65°C
No
50
1.35
12.7
P3. Eco
50°C
Yes
160
1.00
12.0
P4. Quick
40°C
No
30
0.90
12.4
P5 Pre wash
-
No
15
0.02
4.5
The values declared above are the values obtained under laboratory conditions according to relevant standards.
These values can change depending on the conditions of product’s use and environment.
Important Note for Test Laboratories
For detailed information on performance tests, please contact following address:
"
dishwasher@standardte
st.info
” .
In your email, please provide the model name and
serial number (20 digits) which you can find on the appliance door.
1. Intensive
– Heavily soiled pots and pans. Do not put delicate items
in.
2. Super 50
’
– uses more energy than an Eco program. Use when you
need quick results
3. Eco
– Longest cycle, but most energy efficient for normal loads.
4. Quick
– 30 minute wash for lightly soiled dishes.
5. Pre wash
– Rinse to loosen residue awaiting a full load.
Optimum performance from all programs can be achieved by respecting the specified number of place settings.
Delay Timer button
You can delay the commencement of the program by either 3,6 or 9 hours.
Press the button until the required LED lights up on the panel.
