AMU Rescon
Program List and Explanations
A-96.250.351 / 230320
51
5.1.3
USP Operating Mode:
Switch the USP Operating Mode on or off
).
5.1.4
Sensor parameters:
5.1.4.1
Cell Constant
: Enter the cell constant ZK printed on the label of the
).
5.1.4.2
Temp. Corr
: Enter the temperature correction value DT printed on
).
5.1.4.3
Cable length
: Enter the cable length of the sensor.
5.1.5
Temp. Compensation:
Choose between
none
coefficient
neutral salts
high purity water
strong acids
strong bases
ammonia, ethanolamine
morpholine
5.2 Signal Outputs
NOTICE:
The navigation in the menu <Signal Output 1> and
<Signal Output 2> is identical. For reason of simplicity only the
menu numbers of Signal Output 1 are used in the following.
5.2.1 and 5.2.2
Signal Output 1 and 2:
Assign process value, the current loop
range and a function to each signal output.
5.2.1.1
Parameter:
Assign one of the process values to the signal output.
Available values:
5.2.1.2
Current Loop:
Select the current range of the signal output.
Make sure the connected device works with the same current
range.
Available ranges: 0–20 mA or 4–20 mA
Resistivity
Conductivity
Meas. Value
Meas. Value
Temperature
Temperature
Sample Flow
Sample Flow
Meas. uc
Meas. uc
