48
A-96.250.351 / 230320
AMU Rescon
Program List and Explanations
2.2.2
Miscellaneous
:
2.2.2.1
Case Temp:
Shows the actual temperature in °C inside the trans
-
mitter.
2.3 Sample
2.3.1
Sample ID
:
Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample
Temperature:
Shows temperature in °C.
(Nt5K)
: Shows raw value of the temperature in
2.4 I/O State
Shows actual status of all in- and outputs.
2.4.1
2.5 Interface
Only available if optional interface is installed. Review programmed
communication settings.
3 Maintenance
3.1 Simulation
To simulate a value or a relay state, select the
alarm relay,
relay 1or 2
signal output 1or 2
with the [
] or [
] key.
Press the [Enter] key.
Change the value or state of the selected item with the [
] or
[
] key.
Press the [Enter] key.
The value is simulated by the relay/signal output.
Alarm Relay
:
Active or inactive
Relay 1 and 2
:
Active or inactive
Input
:
Open or closed.
Signal Output 1 and 2
:
Actual current in mA
