Swann AMU pH-Redox, Руководство оператора, Страница: 64 / 90

62
A-96.250.441 / 060619
AMU pH-Redox
Program List and Explanations
2.2.2 Miscellaneous :
2.2.2.1 Case Temp: Shows the actual temperature in °C inside the trans-
mitter.
2.2.3 QA History: Shows the QA values of the last quality assurance
procedures:

Number : Each QA measurement is assigned to a number.

Date, Time : Date and time of the assigned number.

Deviation pH : The pH deviation of the on-line instrument.

Deviation Temperature : The temperature deviation of the on-line
instrument.

QA-Check successful : <Yes> or <No>, information whether the
quality assurance was successful or not.
2.3 Sample
If <Flow measurement> = None and <Temp. Sensor> = no
2.3.301

Sample ID : Shows the assigned sample identification. This
identification is defined by the user to identify the location of the
sample.

Temperature: Shows the predefined comp. temperature in °C.
If <Flow measurement> = Q-Flow and <Temp. Sensor> = no
2.3.311

Sample ID : Same as 2.3.301

Temperature: Same as 2.3.301

Sample flow: Shows the actual sample flow in l/h
( Raw value ) in Hz
If <Flow measurement> = Q-Flow and <Temp. Sensor> = yes
2.3.310

Sample ID : Same as 2.3.301

Temperature: Shows the actual temperature in °C
( Pt1000 ) raw value in Ohm

Sample flow: Shows the actual sample flow in l/h
( Raw value ) in Hz
2.4 I/O State
Shows the actual status of all in- and outputs.
2.4.1

Alarm Relay :
Active or inactive

Relay 1 and 2 :
Active or inactive

Input :
Open or closed

Signal Output 1 and 2 :
Actual current in mA