106
A-96.250.581 / 220616
AMI Codes-II CC
Default Values
11.
Default Values
NOTICE:
The parameter Cleaning is only visible if an optional
Cleaning Module is connected to the AMI Codes II.
The parameters pH and Temperature are only visible if the
option pH is installed.
Operation:
Sensors:
Filter Time Const.:..................................................................30 Sec
Hold after Cal.:.....................................................................120 Sec
Interval fac: .............................................................................. 5 Min
Interval tc2 ............................................................................. 20 Min
default pH: (
If pH option is not installed
)................................... 7 pH
Alarm Relay
...................................................................... same as in Installation
Relay 1 and 2
...................................................................... same as in Installation
Input
...................................................................... same as in Installation
Logger:
Logger Interval:........................................................... Event Driven
Clear Logger: ................................................................................no
Display
Display 1; Line 1 .................................................... Free av. chlorine
Display 1; Line 2 .......................................................Total chlorine 2
Display 1; Line 3 ....................................................... Calc. comb. cl.
Display 2; Line 1 .......................................................Total chlorine 1
Display 2; Line 2 ................................................. Calc. dichloramine
Display 2; Line 3 .......................................................Total chlorine 2
Installation:
Sensor:
Dimension:.................................................................................ppm
Interpolation: .................................................................................no
Ref. Verification:.......................................................................0.255
Standard: Standard 1:.......................................................... 7.00 pH
Standard: Standard 2:.......................................................... 9.00 pH
Cleaning.......................................................................... 2 Solutions
Signal Output
1 and 2
Parameter: ............................................................ Free av. chlorine.
Current loop: ..................................................................... 4 - 20 mA
Function: .................................................................................. linear
Scaling: Range low: ...........................................................0.00 ppm
Scaling: Range high:..........................................................5.00 ppm
Scaling: Temperature: Range low: ......................................... 0.0 °C
Scaling: Temperature: Range high:.......................................50.0 °C
Scaling: pH: Range low: ..................................................... 0.00 pH
Scaling: pH: Range high: ................................................... 14.00 pH
