SVS-Vistek CameraLink svs16000 Скачать руководство пользователя страница 95

Страница: 95 / 97

Users Manual Area Scan Cameras SVSGigE

Page 95

Users Manual –svs11002 and svs16000

21.1 Safety Instructions

• This section contains important information for the operator (user) and/or people around

him/her to avoid personal injuries, or property damages against him/her or people around

him/her by using this product correctly.
• Prior to use, read this section carefully to fully understand its instructions for correct use.

Definition of markings

The meaning of each mark used in this instruction manual is given below
DANGER

This mark warns the user that improper use, indicated with this mark,
may cause death or severe personal injuries against the user or people

around him/her.

CAUTION This mark warns the user that improper use, indicated with this mark,

may cause personal injuries (*1) or material damages (*2) against the
user or people around him/her.

Notes

*1:

Personal injuries mean wounds, burns, electric shocks, and others for which the

person injured need neither to be hospitalized nor to be cared for the long term.
*2:

Material damages mean any direct or consequential damages related to property or

material loss.



This mark indicates what the user SHOULD NOT DO. The details of things,

which the user should not do, are described next to this mark.



This mark indicates what the user MUST DO. The details of things, which

the user must do, are described next to this mark.
This mark indicates that the user must be alert against a possible

DANGER. The details of the DANGER, which the user must be aware of
are described next to this mark.



This mark indicates that the user is given a CAUTION against possible
hazards. The details of the CAUTION, which the user must be aware of,

are described next to this mark.



Handling Precautions

DANGER

If any overheating sign is observed, discontinue the use immediately.

In the event that smoke, smell, or any other overheating sign is observed,
turn the power switch of the system OFF immediately and remove the

power cable(s) from the system connectors, like computer, camera,

lightning. Do NOT try to continue to use the system. To do so in spite of
clear signs of malfunction invites a fire, an electric shock hazard, or a

serious damage to the system components. In such case, contact for
repair service us or our dealer/distributor, from which you purchased the

system.



If any malfunctioning sign is observed, discontinue the use immediately.

Do NOT try to use the system when it is malfunctioning. (Ex. No images
on the monitor) In the event of malfunction, turn the power switch of the

system OFF immediately and remove the system power cables from the
system components connectors. In such case, contact for repair service us

or our dealer/distributor from which you purchased the system.



If any foreign object gets into the system components, discontinue the use

immediately.
In the event that liquids, small particles, or any other foreign objects get

into the system components, do NOT try to continue to use the system. To

Содержание CameraLink svs16000


































































































Результаты поиска

Содержание CameraLink svs16000

Отзывы:

Бренды по названию

Популярные бренды

SVS-Vistek CameraLink svs16000, Руководство пользователя

Результаты поиска

Содержание CameraLink svs16000

Отзывы:

Бренды по названию

Популярные бренды