SVS-Vistek CameraLink svs16000, Руководство пользователя

Страница: 34 / 97

Users Manual Area Scan Cameras SVSGigE Page 34
Users Manual –svs11002 and svs16000
© SVS-VISTEK GmbH
13.2 Gain balancing (only “F” + “U” version and if set to 2 tap /”L” version)
The output for the “F” + “U” version is as follows:
2 taps are read out and the right half of the image is mirrored. It is put together
correctly without user access.
HOWEVER: As a result changing gain for the
complete image requires fine gain tuning separately for both images halfs. It
is not necessary for the “S” version (One tap sensor output).
2 Tap sensor output “F”
Note: “F” +”U” version:
Note that the CCD has 2 outputs. Therefore there are a “right” and a
“left” image half. If you use the slider both channels are amplified.
However depending on the amplifications there might be different
values necessary in order to make both channels equal. Fine tuning
in “Gain Value” is necessary. It is still possible to have 1-2 counts
difference between both image halves. This is NOT a camera problem
and must be adjusted by an experienced user. Same is true for the
offset . For dynamic adjustments see “Auto tab Balance”.
 Gain (0 … 18 dB)
1 Tap sensor output “S” version