SVS-Vistek CameraLink svs16000 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 97

background image

Users Manual Area Scan Cameras SVSGigE

Page 42

Users Manual –svs11002 and svs16000
© SVS-VISTEK GmbH

13.11

Environmental Issues:

13.11.1 Europe

The camera is CE tested and the rules of EN 50022-2 apply.

13.11.2 USA and Canada

I. Labeling requirements:

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

II. Information to the user:
Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Camera complies with FCC Form 47 Rules.

Note:

It is necessary to use a shielded power supply cable. You can than

use the “shield contact” on the connector which has GND contact to
the camera housing. This is essential for any use. If not done and

camera is destroyed due to Radio magnetic Interference (RMI)

WARRANTY is void!

Operating temperature Spec:

-10 - +45C. In order to keep dark current low.

To achieve 9 optical bits, operation at 25° max. is
recommended.

Power

US/UK and European line adapter can be delivered.
Otherwise use +12V DC with filtered and stabilized

power supply.

Shock test

About 30 g in 6 ms

Vibration test

10 g in 6 ms

RoHS: All cameras comply with the recommendation of the European Union

concerning RoHS Rules.

13.12

Spectral response curves

Monochrome Version

«
...
40
41
42
43
44
...
»

Содержание CameraLink svs16000


































































































Отзывы:

Нет отзывов

Похожие инструкции для CameraLink svs16000

Бренд: Samsung Страницы: 22

GX-20 - Digital Camera SLR

Бренд: Samsung Страницы: 158

Бренд: Samsung Страницы: 100

Бренд: Samsung Страницы: 98

Бренд: Samsung Страницы: 186

Galaxy Camera EK-GC100

Бренд: Samsung Страницы: 178

Galaxy Camera EK-GC100

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 98

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 116

BL103 - 10.2 Mega Pixels Digital Camera

Бренд: Samsung Страницы: 98

Бренд: Olympus Страницы: 156

Бренд: Olympus Страницы: 156

Бренд: Olympus Страницы: 2

Бренд: Hama Страницы: 60

Бренд: Hama Страницы: 244

ARTCAM-264IMX-BW-WOM

Бренд: ARTRAY Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды