Suzuki LT-A450X, Руководство пользователя

Страница: 383 / 528

CHASSIS 8-65
TOE ADJUSTMENT
Adjust the toe-out as follows:
• Place the vehicle on level ground and set the handlebars
straight.
• Make sure all the tires are inflated to the standard pressure.
(
$
2-26)
• Place 75 kg (165 lbs) weight on the seat.
• Loosen the lock-nuts (
1
,
2
) on each tie rod.
NOTE:
Hold the concave part
a
of tie rod with a wrench.
#
• Measure the distances (
A
and
B
) between the front wheels.
Subtract the measurement of
A
from that of
B
to find the toe-
out. If the toe-out is not within specification, adjust the tie rod
to the right or left until the toe-out is within the specified range.
B
–
A
= Toe-out
&
Toe-out
Standard: 10 ± 4 mm (0.39 ± 0.16 in)
• Temporarily tighten the four lock-nuts.
• Check that the distances (
C
and
D
) are equal, as shown. If
the distances are not equal, adjust the tie rod to the right or
left until the toe-out is within specification. Check the toe-out
again by measuring distances
A
and
B
.
• If the toe-out is not within specification, repeat the adjustment
as above until the proper toe-out is obtained and distances
C
and
D
become equal.
• After adjustment has been made, tighten the four lock-nuts
1
to the specified torque.
" Tie rod lock-nut: 45 N·m (4.5 kgf-m, 32.5 lb-ft)
The lock-nuts
2
have left-hand threads.
Forward
Right angle
(90 deg.)
Forward