Sutter Instrument Lambda DG-4Plus/USB, Руководство по эксплуатации

Страница: 35 / 98

LAMBDA DG-4 & 5 PLUS/USB OPERATION MANUAL – REV.
1.01B3
(
20190607
)
23
Press 6 to view the MOVE ON SYNC, INHIBITED BY THE STROBE LINE menu.
Press 1 to activate MOVE ON SYNC, INHIBITED BY STROBE and return to the MAIN
MENU or press 0 to abort the mode selection routine and retain the current mode setting.
The status of the operational mode will be indicated in the lower line of the MAIN MENU
display
3.7.7 Edit a Filter Definition Mode
[MODE/7]
3.7.7.1 General Information
The optical pathway for light from the xenon lamp in the Lambda DG-4 is determined by the
angle at which the mirrors on the Input and Output galvanometers are positioned. The Input
Galvanometer directs the collimated light beam through one of the four FILTER
POSITIONS (shown below) and, thus, through whatever interference filter is installed there.
The angle of a Galvanometer is not expressed in degrees, here, but in an arbitrary unit whose
value ranges from 0 to 4095. The Input Galvanometer Value that defines the optimal light
path for each of the FILTER POSITIONS in your Lambda DG-4 has been determined at the
factory, and is provided on a separate Optical Alignment Data Sheet (see the example shown
below).
0=EXIT, 1=NEXT PAGE. 4= MOVE ON SYNC.
PULSE, 5 FOR MOVE ON STROBE PULSE
0=EXIT, 1=NEXT PAGE. PRESS 6 FOR MOVE ON
SYNC, INHIBITED BY THE STROBE LINE
NEXT FILTER ON SYNC, INHIBITED BY STROBE,
IS OFF. PRESS 1 TO TURN ON, 0 TO KEEP IT OFF
10 = FILTER NUMBER, TURBO-BLANKING- OFF
INPUT = MANUAL MOVE ON SYNC/STROBE