background image

FXLED    INSTALLATION INSTRUCTIONS

®

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE

RAB fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding 

is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A 

PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNING: Make certain power is OFF before installing or maintaining fixture. No user serviceable parts inside.

SLIPFITTER MOUNTING

1. The slipfitter mounting fits a 2 3/8” O.D. 

Tenon

. Place the

slipfitter over the

 Tenon

 and secure the fixture with the 

Set Screws

 (2) on the side of the slipfitter.

2. Remove two screws on side of 

Round Cover Plate

.

Remove the 

Round Cover Plate

 and adjust the angle of 

the fixture.

3. Loosen the 

Locking Bolt

 and swivel fixture to desired

angle.

4. Tighten the 

Locking Bolt

 and re-attach  

Round Cover

Plate.

Tenon

Set Screws

Round 

Cover 

Plate

Locking Bolt

Pivot Bolts

TRUNNION MOUNTING

CAUTION

: UL and C-UL listed or CSA certified liquid tight 

cord grip suitable for use with three conductor type STW 

flexible cord shall be used for connection to a wet location 

outlet box provided by others.
To adjust the angle of the fixture using the trunnion:
1. Loosen the 

Pivot Bolts

 & angle locking screw.

2. Adjust fixture to desired angle.
3. Tighten 

Pivot Bolts

 & angle locking screw.

TROUBLESHOOTING 

1. Check that the line voltage at the fixture is correct.  Refer

to wiring directions.

2. Be sure the fixture is grounded properly.
3. Is the photocell, if used, functioning properly?

CLEANING & MAINTENANCE

CAUTION: Be sure fixture temperature is cool enough 

to touch. Do not clean or maintain while fixture is 

energized.

1.

Clean glass lens with non-abrasive glass cleaning

solution.

2.

Do not open the fixture to clean the LED. Do not touch

the LED.

ACCESSORIES

Chrome Wire Guard:

   

GDFXLED78W

Poly Shield:

GDFXLED78P

Lens & Door Replacement:

 

LFXLED78   (bronze)
LFXLED78W 

 

(white)

Отзывы: