Sutter Instrument Lambda DG-4Plus/USB, Руководство по эксплуатации

Страница: 43 / 98

LAMBDA DG-4 & 5 PLUS/USB OPERATION MANUAL – REV.
1.01B3
(
20190607
)
31
The first page will contain the first 26 values separated by commas. There are three pages
available for displaying the RING BUFFER values. To move between the pages press the
numeric key (1,2 or 3) corresponding to the desired page. Press ENTER to return to the
MAIN MENU.
3.7.8.4 Running the RING BUFFER Sequence
The values in the RING BUFFER can only be RUN from one of the “triggered” operational
modes since the filter changes are dependent on a STROBE PULSE or SYNC PULSE. Make
certain that you have selected a “triggered” mode before proceeding and that the trigger
source is connected to the appropriate input on the back of the Lambda DG-4. To “manually”
RUN the RING BUFFER access the SETUP RING BUFFER menu by pressing the MODE
key followed by the 8 key. Alternatively, you can “page” through the mode selection menus
by pressing MODE. The following menus will be displayed:
Press 1 three times to scroll through the NEXT TWO PAGES to see the desired option or
press the 0 key to abort the routine and return to the MAIN MENU.
Press 8 to view the SETUP RING BUFFER menu or the 0 key to return to the MAIN
MENU. The following display will appear if you press 8:
1,2,3,4,
0=EXIT, 1=NEXT PAGE, 2 = TURBO BLANKING
3 = DISPLAY THE FIRST 4 FILTER VALUES
0=EXIT, 1=NEXT PAGE. 4= MOVE ON SYNC.
PULSE, 5 FOR MOVE ON STROBE PULSE
0=EXIT, 1=NEXT PAGE. PRESS 6 FOR MOVE ON
SYNC, INHIBITED BY THE STROBE LINE
0=EXIT, 1=NEXT PAGE. 7 = EDIT A FILTER
DEFINITION, 8 = SETUP THE RING BUFFER
0=EXIT. 1 = RUN EXISTING BUFFER, 2 = TO
CREATE NEW FILTER SEQUENCE. 3 = DISPLAY