SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
9
Step 3. Install the Inside Antennas
Choose a location for the booster and inside antenna that is near a working outlet and at least 25 Ft from the outside antenna.
Consider the below factors affecting booster performance.
Signal strength at the location of the outside antenna.
Interior building materials between the inside antennas and your mobile device.
Distance between the outside antenna and inside antennas (minimum 25 ft. separation)
Ensure inside antennas point away from the outside antenna
Note: This booster should not be used near open fire or flame. Storage and transportation: Store and place in non-extreme room-
temperature and dry environment.
For kits that include Inside Ultra Thin Antennas
The SC-588W wideband antenna is an omni-directional interior antenna that gathers and sends signals from all sides. Besides
the antenna itself, parts include mounting options for an install that is accessible by crawl space or one that is not. Optimally, It
should be located central to where signal is needed with minimal obstacles. The range of this antenna is dependent on three
factors:
1. Physical obstructions
2. Power generated by booster
3. Signal level received by the outdoor antenna
For Each Antenna:
If accessible by crawl space:
1.
Drill a 20 mm diameter hole in the ceiling. The size should be large enough to
allow the antenna’s plastic cable base to pass through.
2.
Place antenna cable through hole.
3.
From crawl space, screw the fixing nut onto antenna
If not accessible by crawl space, a metal bracket mount has been provided along with instructions for this mounting option.
Route Cable
1.
Connect each indoor antenna to an indoor cable provided with your kit. Run
the cables along route toward the planned location of your booster.
Note: Be sure to provide enough separation from outdoor antenna (at least 25 ft. is
recommended).
RF ANTENNA
CABLE
THREADED MOUNT
CEILING
THREADED NUT
INDOOR
CABLE
