SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
8
IMPORTANT:
Take caution during installation to not aim these antenna towards the other
antenna
Aiming Directional Antennas
➊
Install the Yagi antenna
Once you have identified your install location, assemble the u-bolt,
bracket, nuts and washers onto a pole (available separately) as shown in the
illustration.
Keep the connections loose enough to allow the antenna to rotate until the
optimum direction is found.
Orient the antenna with the drip hole at the bottom.
➋
Place the Outside Amplifier
Next assemble the bracket for the outside amplifier the same way you did
the yagi bracket and secure in the same location within range of the antenna
cable connection.
➌
Connect the yagi cable connector to the outside amplifier as shown
here.
With both components in place, connect one end of the provided 75 ft. coax
cable to the outside amplifier and hand tighten the connection.
Drip Hole
Outside system assembly
U-bolt
➊
➋
➌
Nut
Washer
L-bracket
