SureCall Fusion5X Скачать руководство пользователя страница 12

Страница: 12 / 22

SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com

Step 5: Connect Power Source and Turn On

Connect the AC power cord to the booster and plug into a 110V AC power outlet. Once the booster has been completely
assembled, turn the booster’s power switch to ON.

Note: If the Power LED does not turn ON, see the ”Troubleshooting” on page 18

section.

Note: This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the

booster, cause personal injury, and void your warranty.

Step 6: Check and Optimize System, If Needed

Place a call in the room where the inside antenna is located to confirm that your phone is receiving a boosted signal.

Note: Bars are not always a reliable measure of signal. The best way to confirm signal coverage is the ability to place and hold

a call.

Important: The booster gain should remain at maximum level and only reduced if other recommended actions do not resolve

the issue.

Содержание Fusion5X























Результаты поиска

Содержание Fusion5X

Отзывы:

Похожие инструкции для Fusion5X

Бренды по названию

Популярные бренды

SureCall Fusion5X, Руководство пользователя

Результаты поиска

Содержание Fusion5X

Отзывы:

Похожие инструкции для Fusion5X

Бренды по названию

Популярные бренды