SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
6
INSTALL ATION
Step 1. Find the Area With the Strongest Signal
Identify the outside location with the strongest signal for placement of your outdoor yagi antenna. This is generally found on
the side facing your nearest cell tower and as high as possible -- where the antenna can ‘see’ your cell tower.
For help locating your closest cell tower, you may utilize an app such as ‘Open Signal’ or go to www.antennasearch.com.
Please note,
The coverage area that the booster provides is directly related to the strength of incoming signal received by the
outdoor antenna. Mounting the outside antenna where the signal is the strongest provides the best results. if signal is extremely
weak where the outside antenna is installed, indoor coverage will be limited. Bars are not always a reliable measure of signal.
The best way to confirm signal coverage is the ability to place and hold a call.
Installation Overview
Before installation, review the above information.
In addition to the contents listed below, you will need a ladder, drill, cable clips, and a pole or mast to mount your outside
components. A mounting pole is available separately (SC-MOUNT-JBAR), if needed. Prior to securing the location of any
booster parts, a “soft install” is recommended as adjustments may be needed to optimize performance.
Step 1.
Find the outside area with the strongest signal.
Step 2.
Install the outside yagi antenna and outside amp in the location identified in step 1.
Step 3.
Install the inside antennas -- either Ultra Thin™ or panel antennas (x2).
Step 4.
Place inside host amp and connect cables
Step 5.
Connect power source and turn on.
Step 6.
Test system performance and optimize configuration as needed.
