SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
11
Step 4: Place the Inside Host Unit and Connect Cables
Place the Inside Host unit in your chosen location that is on a flat surface or mounted to a wall. Choose a location that is near a
working AC outlet.
To install the booster to a wall, use the supplied screws or appropriate screws for surface and drill through screw tab holes on
booster (see
“Host Unit Diagram”
illustration).
Connect the open end of each inside cable connector to the ports of the host unit labeled INSIDE.
Next, connect the outside and inside components by routing the outside cable from the outside amplifier, indoors and connect
to the booster port marked “OUTSIDE”.
44
OFF
54
64
44
OFF
54
64
45
OFF
55
65
52
OFF
62
72
51
OFF
61
71
Power Switch
Connector to
outside antenna
Connector to outside antenna
Connectors to inside antennas
Screw tab holes for
optional wall mounting
Power Jack
Power LED
Host Unit Diagram
