SureCall, Inc | 1-888-365-6283 | [email protected] | www.surecall.com
10
For kits that include Inside Panel Antennas
The provided panel antennas are multi-band directional antennas with a 120˚ reach. They
should be mounted facing the area signal is needed. It is also important that they do not point
toward the outdoor antenna. Range of antenna is dependent on three factors:
1.
Physical obstructions
2.
Power generated by booster
3.
Signal level received by the outdoor antenna
Besides the antenna itself, parts include mounting equipment for a flat horizontal surface.
You can also install your interior antenna behind a wall or above a ceiling panel
provided there are not materials that could obstruct signals.
For Each Antenna:
1.
Choose location for mounting antenna on vertical surface. Ideal height off
the ground or floor should be the approximate height of regular cell phone
use.
2.
Using plate, mark position of desired screw placement with pencil or marker.
3.
Screw mounting plate into place with the slide panel protruding towards you.
4.
Slide antenna securely onto mounting plate.
Route Cable
Connect each indoor antenna to an indoor cable provided with your kit. Run the
cables along route toward the planned location of your booster.
Note: Be sure to provide enough separation from outdoor antenna (at least 25 ft.
is recommended).
RF CABLE
SC-400
FLAT SURFACE
MOUNTING PLATE
SCREWS
