Supero SUPERSERVER 8046B-6RF Скачать руководство пользователя страница 85

Страница: 85 / 104

Chapter 7: BIOS

7-19

BIOS EHCI Hand-Off

Select Enabled to support BIOS Enhanced Host Controller Interface to provide a

workaround solution for an operating system that does not support EHCI Hand-Off

technology. When enabled, the EHCI Interface will be changed from the BIOS-

controlled to the OS-controlled. The options are Disabled and

Enabled

Legacy USB1.1 HC Support

Select Enabled to enable Legacy USB 1.1 HC support. The settings are Disabled

and

Enabled

Hot-Plug USB FDD Support

When this item is set to Enabled, a dummy Floppy Device Drive will be created as

a Hot-Plug Floppy device in the system. When this item is set to

Auto

, a dummy

fl oppy device will not be created if no USB FDD device is detected. The options

are Disabled, Enabled and

Auto

ACPI Confi guration

Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)

power management settings for your system.

Advanced ACPI Confi guration

This feature allows the user to confi gure the settings for the Advanced ACPI (Ad-

vanced Confi guration and Power Interface) settings.

ACPI Version Features

Use this feature to select the ACPI version to be used in the system. The options

are ACPI v1.0,

ACPI v2.0

and ACPI v3.0. Please refer to ACPI's website for further

explanation: http://www.acpi.info/.

ACPI APIC Support

Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

AMI OEMB Table

Select Enabled to include the OEMB Table Pointer in the RSDT (Root System

Description Table) pointer list. The options are

Enabled

and Disabled.

Headless Mode (Available ACPI Aware O/S='Yes')

This feature is used to enable system to function without a keyboard, monitor or

mouse attached The options are Enabled and

Disabled

Содержание SUPERSERVER 8046B-6RF









































































































Результаты поиска

Содержание SUPERSERVER 8046B-6RF

Отзывы:

Похожие инструкции для SUPERSERVER 8046B-6RF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 8046B-6RF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 8046B-6RF

Отзывы:

Похожие инструкции для SUPERSERVER 8046B-6RF

Бренды по названию

Популярные бренды