Supero SUPERSERVER 6027B-TLF, Руководство пользователя

Страница: 48 / 106

5-18
S
UPER
S
ERVER 6027B-TLF User's Manual
SGPIO
Pin Defi nitions
Pin# De fi nition Pin De fi nition
1 NC 2 NC
3 Ground 4 DATA Out
5 Load 6 Ground
7 Clock 8 NC
T-SGPIO 1/2 Headers
Two T-SGPIO (Serial-Link General Pur-
pose Input/Output) headers are lo-
cated next to the I-SATA ports on the
serverboard. These headers are used to
communicate with the enclosure man-
agement chip in the system. T-SGPIO
1 is for SATA 0~3 ports and T-SGPIO 2
is for SATA 4/5 ports. In addition, SCU-
SGPIO-1 and 2 headers are included for
the SCU-SATA ports. See the table on the
right for pin de
fi nitions.
Unit ID Switch (UID SW)
The rear UID switch, the rear UID LED
and front UID LED on JF1 are designed
to work together. When the user pushes
the rear UID switch, the blue backpanel
UID LED and front UID LED will turn on.
Push the rear UID switch again to turn
off UID LED and the front UID LED. This
provides easy identi
fi cation of a system
unit that may be in need of service.
Note:
UID can also be triggered via
IPMI on the serverboard. For more
information on IPMI, please refer to
the IPMI User's Guide posted on our
website.
Ethernet Ports
Two Gigabit Ethernet ports (LAN1/2)
are located on the I/O backplane on
the serverboard to provide internet
connections. In addition, an IPMI_
Dedicated LAN, located above USB
0/1 ports on the backplane, provides
KVM support for IPMI 2.0. All these
ports accept RJ45 type cables.
Note
: Please refer to the LED Indica-
tor Section for LAN LED information.
LAN Ports
Pin Defi nition
Pin# De fi nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED (Yel-
low, +3V3SB)
5 TD1- 14 Link 1000 LED (Yel-
low, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
(NC: No Connection)
UID Switch
Pin# De fi nition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED (LE2)
Status
Color/State OS Status
Blue: On Windows OS Unit Identi fi ed
Blue:
Blinking Linux OS Unit Identi fi ed