Supero SUPERSERVER 6027B-TLF, Руководство пользователя

Страница: 47 / 106

Chapter 5: Advanced Serverboard Setup
5-17
Power Supply I 2 C Connector
The Power Supply (I
2
C) connector is
located at JPI
2
C1 on the serverboard.
This connector monitors the status of the
power supply, fan and system tempera-
ture. See the table on the right for pin
de
fi nitions.
PWR Supply I 2 C
Pin Defi nitions
Pin# De fi nition
1 Clock
2 Data
3 PWR Fail
4 Ground
5 3.3V
Trusted Platform Module Header
This header is used to connect a Trusted
Platform Module (TPM), available sepa-
rately from a third-party vendor. A TPM is
a security device that allows encryption
and authentication of hard drives, disal-
lowing access if the TPM associated with
it is not installed in the system. See the
table on the right for pin de
fi nitions.
Trusted Platform Module Header
Pin Defi nitions
Pin # De fi nition Pin # De fi nition
1 LCLK 2 GND
3 LFRAME 4 No Pin
5 LRESET 6 VCC5
7 LAD3 8 LAD2
9 VCC3 10 LAD1
11 LAD0 12 GND
13 RSV0 14 RSV1
15 SB3V 16 SERIRQ
17 GND 18 CLKRUN
19 LPCPD 20 RSV2
Wake-On-LAN
The Wake-On-LAN header is located
at JSTBY1 on the serverboard. See
the table on the right for pin de
fi nitions.
(You must also have a LAN card with a
Wake-On-LAN connector and cable to
use this feature.)
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin# De fi nition
1 +5V Standby
2 Ground
3 Wake-up
IPMB
A System Management Bus header
for IPMI 2.0 is located at JIPMB1.
Connect the appropriate cable here
to use the IPMB I
2
C connection on
your system.
IPMB Header
Pin Defi nitions
Pin# De fi nition
1 Data
2 Ground
3 Clock
4 No Connection