Supero SUPERSERVER 6027B-TLF Скачать руководство пользователя страница 90

Страница: 90 / 106

7-24

UPER

ERVER 6027B-TLF User's Manual

Trusted Computing (Available when a TPM device is detected

by the BIOS)

Confi guration

TPM Support

Select Enabled on this item and enable the TPM jumper on the motherboard to
enable TPM support to improve data integrity and network security. The options
are

Enabled

and Disabled.

TPM State

Select Enabled to enable TPM security settings to improve data integrity and
network security. The options are Disabled and

Enabled

Pending Operation

Use this item to schedule an operation for the security device. The options are

None

, Enable Take Ownership, Disable Take Ownership, and TPM Clear.

Note:

During restart, the computer will reboot in order to execute the pend-

ing operation and change the state of the security device.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.

Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel
Trusted Execution Technology.

Содержание SUPERSERVER 6027B-TLF











































































































Результаты поиска

Содержание SUPERSERVER 6027B-TLF

Отзывы:

Похожие инструкции для SUPERSERVER 6027B-TLF

Бренды по названию

Популярные бренды

Supero SUPERSERVER 6027B-TLF, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6027B-TLF

Отзывы:

Похожие инструкции для SUPERSERVER 6027B-TLF

Бренды по названию

Популярные бренды