Supero SUPERSERVER 6018R-MT, Руководство пользователя

Страница: 63 / 132

Chapter 5: Advanced Serverboard Setup
5-15
Chassis Intrusion
The Chassis Intrusion header is desig-
nated JL1. See the board layout for the
location of JL1 and the table on the right
for pin definitions.
Fan Headers
There are eight fan headers on the
X10DRL-i. All are 4-pin fans but are
backward compatible with traditional
3-pin fans. Fan speed control via IPMI
is available for 4-pin fans only. See the
table on the right for pin definitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20 of
JF1. Refer to the table on the right for
pin definitions.
NMI Button
Pin Definitions
Pin# Definition
19 Control
20 Ground
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Power On LED
The Power On LED connector is located
on pins 15 and 16 of JF1. This connec-
tion is used to provide LED indication of
power being supplied to the system. See
the table on the right for pin definitions.
Power LED
Pin Definitions
Pin# Definition
15 3.3V
16 PWR LED
Serial Ports
Two serial ports are included on the
serverboard: COM1 is a port located on
the rear I/O panel and COM2 is a header
(located near PCI-E slot 1) for front ac-
cess support. See the table on the right
for pin definitions.
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Serial Port Pin Definitions
Pin # Definition Pin # Definition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC