Supero SUPERSERVER 6018R-MT, Руководство пользователя

Страница: 68 / 132

5-20
SUPERSERVER 6018R-MT/6018R-MTR User's Manual
5-9 Jumper Settings
Explanation of Jumpers
To modify the operation of the
serverboard, jumpers can be used to
choose between optional settings. Jump-
ers create shorts between two pins to
change the function of the connector.
Pin 1 is identified with a square solder
pad on the printed circuit board. See
the serverboard layout pages for jumper
locations.
Note: On a two-pin jumper, "Closed"
means the jumper is on both pins and
"Open" means the jumper is either on
only one pin or completely removed.
CMOS Clear
JBT1 is used to clear CMOS (and will also clear any passwords). This jumper
consists of contact pads to prevent accidentally clearing the contents of CMOS.
To clear CMOS:
1. First power down the system and unplug the power cord(s).
2. With the power disconnected, short the CMOS pads with a metal object such
as a small screwdriver.
3. Remove the screwdriver (or shorting device).
4. Reconnect the power cord(s) and power on the system
Note: Do not use the PW_ON connector to clear CMOS .
Connector
Pins
Jumper
Setting
3 2 1
3 2 1
BMC Enable
Jumper JPB1 allows you to enable the
embedded BMC (Baseboard Manage-
ment Controller) to provide IPMI 2.0/
KVM support. See the table on the right
for jumper settings. The default setting
is enabled.
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 BMC Enabled
Pins 2-3 Disabled