Supero SUPERSERVER 6018R-MT, Руководство пользователя

Страница: 65 / 132

Chapter 5: Advanced Serverboard Setup
5-17
Onboard Speaker (SP1)
The onboard speaker provides audible
indications for various beep codes. See
the table on the right for pin definitions.
Onboard Speaker
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
SGPIO Headers
Three SGPIO (Serial General Purpose
Input/Output) headers are included on
the serverboard. These headers are
used to communicate with the System
Monitoring chip on the backplane and
provide a serial interface to the SATA
ports. I-SGPIO 1/2 supports the I-SATA
ports while S-SGPIO supports the S-
SATA ports. See the table on the right
for pin definitions.
SGPIO Headers Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 No Connection
DOM Power Connector
A power connector for SATA DOM (Disk
On Module) devices is located at JSD1.
Connect an appropriate cable here to
provide power support for your Serial
Link DOM devices.
DOM PWR
Pin Definitions
Pin# Definition
1 +5V
2 Ground
3 Ground
TPM/Port 80 Header
A Trusted Platform Module/Port 80 head-
er is located at JTPM1 to provide TPM
support and Port 80 connection. Use this
header to enhance system performance
and data security. See the table on the
right for pin definitions.
TPM/Port 80 Header
Pin Definitions
Pin # Definition Pin # Definition
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
I-SGPIO0/1 & S-SGPIO Support
I-SGPIO1 I-SATA Ports 0/1/2/3 Supported
I-SGPIO2 I-SATA Ports 4/5 Supported
S-SGPIO S-SATA Ports 0/1/2/3 Supported