Chapter 7: BIOS
7-9
Request Transaction ID (Available for the Intel Xeon 5600 platform only)
QuickPath Interconnect (QPI) is the connection between the CPUs and the I/O
hub (IOH). For a transaction to be processed in the QPI, a "Transaction ID" is
required, and it is assigned by an agent (CPU1, CPU2 or the IOH). Each agent
is allocated a number of Transaction IDs based on the QPI IO Bandwidth and the
Request Transaction ID (RTID) setting (32-24-32 or 32-16-40). Once Transaction
IDs are allocated to an agent, it will assign a Transaction ID to an event so that
it can be processed in the QPI. Select Balanced to allocate transaction IDs to
an agent based on the setting 32-24-32. Select IO Bias to allocate RTIDs based
on the setting 32-16-40. The options are
Balanced
and IO Bias.
QPI (Quick Path Interconnect) Links Speed
This feature is used to set data transfer speed for QPI Link connections. The
options are Slow-Mode and
Full-Speed
.
QPI Links Speed
This feature selects QPI's data transfer rate. The options are Slow-mode, and
Full Speed
.
QPI Frequency
This selects the desired QPI frequency. The options are
Auto
, 4.800GT, 5.866GT,
6.400GT.
QPI L0s and L1
This enables the QPI power state to lower power consumption. L0s and L1
are automatically selected by the motherboard. The options are
Enabled and
Disabled
.
Memory Frequency
This feature forces a DDR3 memory module to run at a specifi c frequency. The
available options are
Auto
, Force DDR-800, Force DDR-1066, Force DDR-1333,
and Force SPD.
Memory Mode
If this item is set to Independent, all DIMMs are available to the operating system.
If this item is set to Channel Mirroring, the motherboard maintains two identi-
cal copies of all data in memory for redundancy. If this item is set to Lockstep,
the motherboard uses two areas of memory to run the same set of operations
in parallel. Select Sparing to use memory sparing and create data redundancy
in memory modules for data security. (Sparing is supported by the Westmere-
EP platform.) The options are
Independent
, Channel Mirroring, Sparing, and
Lockstep.
Содержание SUPERSERVER 6016T-MR
