Supero SUPERSERVER 6016T-MR, Руководство пользователя

Страница: 22 / 106

2-6
S
UPER
S
ERVER 6016T-MR User's Manual
Installing the Rack Rails
Determine where you want to place the 6016T-MR in the rack (see Rack and 1.
Server Precautions in Section 2-3).
Position the fi xed rack rail/sliding rail guide assemblies at the desired location 2.
in the rack, keeping the sliding rail guide facing the inside of the rack.
Screw the assembly securely to the rack using the brackets provided. 3.
Attach the other assembly to the other side of the rack, making sure that both 4.
are at the exact same height and with the rail guides facing inward.
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack unit. The next
step is to install the server into the rack.
Line up the rear of the chassis rails with the front of the rack rails. 1.
Slide the chassis rails into the rack rails, keeping the pressure even on both 2.
sides (you may have to depress the locking tabs when inserting). See Figure
2-3.
When the server has been pushed completely into the rack, you should hear 3.
the locking tabs "click".
Figure 2-2. Installing Chassis Rails