Supero SUPERSERVER 6016T-MR, Руководство пользователя

Страница: 20 / 106

2-4
S
UPER
S
ERVER 6016T-MR User's Manual
2-4 Installing the System into a Rack
This section provides information on installing the SuperServer 6016T-MR into a
rack unit. If the system has already been mounted into a rack, you can skip ahead
to Sections 2-5 and 2-6.
Note: the server may be installed as is - rack hardware is optional.
Basic Installation Procedure
The 6016T-MR server comes with two rack mounting brackets, which are located
on each side at the front of the chassis. To mount the system into a rack, simply
screw these brackets directly to the front of the rack (two screws for each bracket).
As Figure 2-1 shows, the brackets can be located at the front of the chassis (left
fi gure) or moved approximately one-third to the rear of the chassis (right fi gure).
Figure 2-1. Identifying the Sections of the Rack Rails