Supero SuperServer 5028R-WR, Руководство пользователя

Страница: 67 / 130

Chapter 5: Advanced Serverboard Setup
5-21
LAN Enable/Disable
Use JPL1 and JPL2 to enable/disable
LAN ports 1/2. See the table on the
right for jumper settings. The default
setting is Enabled.
LAN1/2 Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
VGA Enable/Disable
JPG1 allows you to enable or disable
the VGA port. The default position is on
pins 1 and 2 to enable VGA. See the
table on the right for jumper settings.
VGA Enable/Disable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
BMC Enable
Jumper JPBR1 allows you to enable
the embedded the BMC (Baseboard
Management Controller) to provide
IPMI 2.0/KVM support. See the table
on the right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 BMC Enabled
Pins 2-3 Disabled
SMB Bus to PCIe Slots
Use jumpers JI
2
C1 and JI
2
C2 to con-
nect the System Management Bus
(I
2
C) to PCI-Express slots in order to
improve PCIe slot performance. These
two jumpers are to be set at the same
time. The default setting is Closed to
enable the connections. See the table
on the right for jumper settings.
I
2
C to PCIe
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
PCI-E Slot SMB Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled
Pins 2-3 Disabled
PCI-E Slot SMB Enable (I
2
C1/I
2
C2)
Use jumpers I
2
C1/I
2
C2 to enable PCI-E
SMB (System Management Bus) sup-
port to improve system management
for the PCI-E slots. See the table on
the right for jumper settings.