Supero SuperServer 5028R-WR, Руководство пользователя

Страница: 62 / 130

5-16
S
UPER
S
ERVER 5028R-WR User's Manual
Fan Headers
There are six fan headers on the
serverboard, all of which are 4-pin
fans (Fan 1-2, Fan 4-7). Pins 1-3 of
the fan headers are backward com-
patible with the traditional 3-pin fans.
(Fan speed control is supported with
4-pin fans only.) See the table on the
right for pin definitions. The onboard
fan speed is controlled by IPMI.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. See the table on the right for
pin definitions.
NMI Button
Pin Definitions (JF1)
Pin# Definition
19 Control
20 Ground
Fan Header
Pin Definitions
Pin# Definition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWR Modulation
Power LED
The Power LED connector is located
on pins 15 and 16 of JF1. This con-
nection is used to provide LED indica-
tion of power being supplied to the
system. See the table on the right for
pin definitions.
Power LED
Pin Definitions (JF1)
Pin# Definition
15 3.3V
16 Power LED
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach a chassis intrusion
cable from the chassis to inform you of
a chassis intrusion when the chassis
is opened
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Internal Buzzer (SP1)
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
Internal Speaker
The internal speaker, located at SP1,
can be used to provide audible indica-
tions for various beep codes. See the
table on the right for pin definitions..