Supero SuperServer 5028R-WR, Руководство пользователя

Страница: 57 / 130

Chapter 5: Advanced Serverboard Setup
5-11
5-6 Adding PCIe Add-On Cards
The 5028R-WR can accommodate four standard size PCI-E 3.0 x8 and one low-
profile, half-length PCI-E 3.0 x8 add-on (expansion) cards installed to the riser cards
included in the system.
Installing an Add-on Card
1. Begin by removing the shield located by the riser card.
2. Fully seat the card into the riser, pushing down with your thumbs evenly on
both sides of the card.
3. Finish by using a screw to secure the top of the card shield to the chassis.
The PCI-E slot shields protect the serverboard and its components from EMI
and aid in proper ventilation, so make sure there is always a shield covering
each unused slot.
PCI Slot/Card Configurations
Riser Card Expansion Card Supported
RSC-R2UW-4E8 4x PCI-E x8 cards (full-height, full-length)
RSC-R2UW-E8R 1x PCI-E x8 card (low-profile, half-length)
Figure 5-5. PCI Expansion Card Configuration