Supero SuperServer 5028R-WR, Руководство пользователя

Страница: 96 / 130

7-14
S
UPER
S
ERVER 5028R-WR User's Manual
Link Speed Mode
Use this item to select the data transfer speed for QPI Link connections. The
options are
Fast and Slow.
Link Frequency Select
Use this item to select the desired frequency for QPI Link connections. The op-
tions are 6.4GB/s, 8.0GB/s, 9.6GB/s,
Auto, and Auto Limited.
Link L0p Enable
Select Enable for Link L0p support. The options are Enable, Auto, and Disable.
Link L1 Enable
Select Enable for Link L1 support. The options are Enable,
Auto,
and Disable.
Isoc Mode
Select Enabled for Isochronous support to meet QoS (Quality of Service) require-
ments. This feature is especially important for Virtualization Technology. The
options are Enable and
Disable .

Memory Configuration
Enforce POR
Select Enable to enforce POR restrictions for DDR4 frequency and voltage
programming. The options are
Enabled and Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are
Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, 2400, 2600, 2667, and Reserved (Do not select Reserved).
ECC Support
Select Enable to enable Error Checking & Correction (ECC) support for onboard
memory modules. The options are
Auto , Enable and Disable.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are
Auto , Disabled and Enabled.
Enable ADR
Select Enabled for ADR (Automatic Diagnostic Repository) support to enhance
memory performance. The options are Enabled and
Disabled .