B-6
S
UPER i2DML-8G2/i2DML-iG2
User’s Manual
Checkpoint
Code Description
95h
Initializing the bus option ROMs from C800 next. See the last page of
this chapter for additional information.
96h
Initializing before passing control to the adaptor ROM at C800.
97h
Initialization before the C800 adaptor ROM gains control has com-
pleted. The adaptor ROM check is next.
98h
The adaptor ROM had control and has now returned control to BIOS
POST. Performing any required processing after the option ROM
returned control.
99h
Any initialization required after the option ROM test has completed.
Configuring the timer data area and printer base address next.
9Ah
Set the timer and printer base addresses. Setting the RS-232 base
address next.
9Bh
Returned after setting the RS-232 base address. Performing any
required initialization before the Coprocessor test next.
9Ch
Required initialization before the Coprocessor test is over. Initializing
the Coprocessor next.
9Dh
Coprocessor initialized. Performing any required initialization after
the Coprocessor test next.
9Eh
Initialization after the Coprocessor test is complete. Checking the
extended keyboard, keyboard ID, and Num Lock key next. Issuing the
keyboard ID command next.
A2h
Displaying any soft errors next.
A3h
The soft error display has completed. Setting the keyboard typematic
rate next.
A8h
Initialization before passing control to the adaptor ROM at E000h
completed. Passing control to the adaptor ROM at E000h next.
A9h
Returned from adaptor ROM at E000h control. Performing any
initialization required after the E000 option ROM had control next.
Aah
Initialization after E000 option ROM control has completed. Displaying
the system configuration next.
B0h
The system configuration is displayed.
B1h
Copying any code to specific areas.
00h
Code copying to specific areas is done. Passing control to EFI.
